About The Display - Casio CELVIANO AP-6OR User Manual

'
About the Display
=
19
18
Rhythm/Mixer tone number
Chord name display
Shows chord names while Auto Accompaniment
is being used.
Tone/Rhythm name
Record indicator
While the Song Sequencer ar Pattern Sequencer is
tumed on, this indicator flashes to indicate record
standby and remains on the display without flash
ing while recording is in progress.
VOLUME indicator
Appears when you are using the Mixer to change
the volume parameter of a specific channel
E-14
8 Octave symbol 1
One symbol indicates the note being produced by
the keyboard is one octave higher than the note
shown in the staff notation area 9. Two symbols
indicate lwo octaves higher.
9 Staff notation area
Notes you play on the keyboard, notes played back
from memory, chord forms, and received MIDI
data are shown here
17 Beat number
Shows the beat number during rhythm and Auto
Accompaniment play, and while the Sung Se-
quencer or Pattern Sequencer is turned on. This
display area also shows other information in oth-
er modes,
12 Measure
16 Graphic keyboard
Notes you play on the keyboard, notes played back
from memory, and received MIDI data are indi-
cated on the graphic keyboard
17 Mixer mode indicator
Indicates the current Mixer mode (Internal, Exter-
nal),
18 LAYER/SPLIT indicator
Appear while layer and/or split are being used.
19 EFFECT indicator
Appears when a digital effect is turned on.
aNOTESE
+ Display examples shown in this User's Guide are intended for
illustrative purposes enly. The actual text and values that ap-
pear on the display may differ from the examples shown here.
* Backlight brighlness may appear somewhat unstable immedi-
ately after the piano is turned on. This does not indicate mal-
function, and brightness will stabilize after a few seconds.
'The back lighting of the display is provided by a fluorescent
jamp, which loses its brightness over very long periods of
use. When this happens, contact your original dealer or a
CASIO service provider about having the backlight replaced.
Note that you will be charged for such reptacement.
SOA EO1E
f
g £
t
4
|
|
|
|
i
Within seven seconds after pressing the CONTRAST but-
ton, press the [+] button to increase tne contrast va'ue (mak-
ing the display darker) or the {-] button to decrease it (mak-
ing the display lighter),
After you release the CONTRAST button, the message
"Contrast" remains on the display for a few moments, dur-
ing which you can change the contrast setting further us-
ing the (+] button and the [-] button.
The contrast can be set to a value from 0 to 99. The initial
default setting is 50.
ES