Walking Beltalignment - Bowflex TreadClimber TC10 Owner's Manual

Walking BeltAlignment
Thewalkingbelts need to be adjustedif theyareout of center enough to causea rubbingor scrapingsound.
Adjustments canbe madeat the FrontRoibrof eachTreadb.
Adjusting the WalkingBelts= Whiboperating the machine, n oticewhere the beks runon eachTreadle. TheWalking
BeltAdjustment B oltsareon thefront endof eachRoller. I f the beltis trackingtoofar to the right, usea properly sized
Hex Keyto turnthe right adjustmentboltclockwise onthat beltin full turn increments. If the belttrackstoo far tothe
left, dothe samethingon the left adjustment b olt.
Note:Donotturntheboltscounterclockwise when youadjustthebeltalignment.
BeltTeesien Adjustment = Check the belttensiononlywhenthe machine is unplugged. F rom the belt'smidpoint,a
correctly tensioned beltshouldonlyhavean inchof give.Tocheck,pull the beltupwardat its midpointand measure
thedistanceto the deck.If the distanceis more than an inch,the belt is loose. T otighten,turn bothWalking Belt
Adjustment B oltsclockwise one-halfa turn andchecktensionagain.Repeat t his stepif necessary.
Note:Boltsareturnedcounterclockwise equally to decrease b elttension.
WalkingBelt
Adjustment B olts
33