ASROCK 760GM User Manual page 40

Memory Timing
OC Tweaker
Memory Timing
Power Down Enable
Bank Interleaving
Channel Interleaving
CAS Latency (CL)
TRCD
TRP
TRAS
Command Rate
TRC
TWR
TRFC
TRRD
TWTR
TRTP
TFAW
TCWL
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Power Down Enable
Use this item to enable or disable DDR power down mode.
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the same node, or
accross nodes, decreasing access contention.
Channel Interleaving
It allows you to enable Channel Memory Interleaving. Configuration options:
[Disabled], [Auto]. The default value is [Auto].
CAS Latency (tCL)
The time between sending a column address to the memory and the beginning of the data
in response.
TRCD
Use this item to change TRCD Auto/Manual setting. The default is [Auto].
TRP
Use this item to change TRP Auto/Manual setting. The default is [Auto].
TRAS
Use this item to change TRAS Auto/Manual setting. The default is [Auto].
Command Rate
BIOS SETUP UTILITY
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
760GM-HDV
35