ASROCK 760GM User Manual page 38

760GM-HDV
Boot Failure Guard Count
Configure the number of attempts to boot until the system automatically restores the
default settings.
CPU Active Core Control
This allows you to adjust CPU Active Core Control feature. The configuration options
depend on the CPU core you adopt. The default value is [Disabled].
AMD Turbo Core Technology
This item appears only when the processor you adopt supports this feature. Use this to
select enable or disable AMD Turbo Core Technology. Configuration options: [Auto],
[Enabled] and [Disabled]. The default value is [Auto].
AMD C-State Support
This allows you to enable or disable AMD C-State Support. The default value is
[Enabled].
AMD APM
Application Power Management (APM) ensures that average power con-sumption
over a thermally significant time period remains at or below the TDP for the CPU
mode being used. If [Enabled] is selected, the power consumption is reduced when
overclocking.
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
North Bridge Maximum Frequency
It will display North Bridge Maximum Frequency for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of
Processor Frequency and Processor Voltage. However, it is recommended to keep the
default value for system stability.
33