Loading The Dishwasher - Indesit IDL 410 Installation And Use Manual

Loading the Dishwasher

Before placing the dishes in the dishwasher, remove
the larger food particles to prevent the filter from
becoming clogged, which results in reduced performan-
ce.
If the pots and pans have baked-on food that is
extremely hard to remove, we recommend that they be
allowed to soak before they are washed. This will elimi-
nate the need for extra wash cycles.
Pull out the racks to facilitate loading the dishwasher.
How to Use the Lower Rack
We recommend that you place the most difficult to clean
items on the bottom rack: pots, pans, lids, serving
dishes and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the
sides of the racks in order to avoid blocking the rotation
of the top spray arm.
- Pots, serving bowls, etc. must always be placed top
down.
- Deep pots should be slanted to allow the water to flow
out.
Insert the cutlery into the basket: Knives and other
utensils with sharp edges must be placed in the cutlery
basket with the points facing downwards, or they must
be positioned horizontally in the tip-up compartments
on the upper rack. Position all cutlery items so that they
don't touch.
If the rack has side baskets, the spoons should be
loaded individually into the appropriate slots (see fig.
A).
- Especially long utensils should be placed in the
horizontal position at the front of the upper rack.
How to Use the Upper Rack
The upper rack is designed to hold more delicate
and lighter dishware, such as glasses, coffee and tea
cups and saucers, as well as plates, small bowls and
shallow pans (as long as they are not too dirty).
- Position the dishes and cookware so that they do
not get moved by the spray of water.
How to adjust the Upper rack ...
The top rack can be adjusted using the two rack heights
(top and bottom). To adjust the rack, open up the tabs
that lock the guides and pull out the rack. Arrange the
rack with the back wheels in either the top or bottom
position and then insert it along the guides until the
front wheels are on as well. Close the tabs to lock the
rack in place (see Fig. F).
The height of the upper rack should ideally be
adjusted WHEN THE RACK IS EMPTY.
Never lift or lower the rack on one side only.
Loading examples for the upper rack
Loading examples for the lower rack
Fig. A
)
Fig. F
15
1
2
3
4
EN