Whirlpool WOES7030P Dimension Manual page 3

Electric single wall oven
Table of Contents

Advertisement

Available languages

Available languages

DIMENSION GUIDE
Cabinet Dimensions - Single Ovens, Standard
Installation
Single Ovens Installed in Cabinet
F
E
30" (76.2 cm) models
A. 30" (76.2 cm) minimum cabinet width
B. 1" (2.5 cm) top of cutout to bottom of upper cabinet door
C. 32" (81.3 cm) bottom of cutout to floor
D. 28
1
" (72.4 cm) minimum cutout width
2
1
E. 1
" (3.8 cm) minimum bottom of cutout to top of cabinet door
2
F. 28" (71.2 cm)* recommended cutout height
G. 24" (60.7 cm) cutout depth
*NOTES:
■ The cutout height can be between 27
(69.2 cm and 74.8 cm) for single ovens.
■ Tall shield for installations greater than 28
B
D
G
C
1
" and 29
7
"
4
16
" (72.9 cm).
11
16
Cabinet Dimensions - Single Ovens, Flush
Installations
NOTE: This is an alternate option to install your product in the
cabinet and obtain a fl ush look. For standard installation, refer
section "Cabinet Dimensions - Single Ovens, Standard
Installation".
NOTE: On single and double oven models installed above a
warming drawer or for ovens installed using fl ush installation
cabinetry, a defl ector kit must be installed. See the "Online
Ordering" section of your Quick Start Guide for information on
ordering.
A 25" (63.5 cm) minimum cutout depth is required.
Top and bottom gaps will be 1/8" (0.3 cm) gap above and below
the product. Top and bottom gaps not required for installation.
Exposed areas of the cabinet should be fi nished to match.
Single Ovens Installed in Cabinet
Front View
B
D
E
F
G
H
30" (76.2 cm) models
A. 3/4" (1.9 cm) top cleat*
B. 30
1
" (76.8 cm) minimum width of flush inset cutout
4
7
C. 28
" (73.3 cm) minimum width of opening
8
D. 29
1
" (74.3 cm) minimum height of flush inset cutout
4
E. 28
1
" (72.4 cm) recommended cutout height
2
F. 11/16" (1.7 cm) side cleat*
G. 1/4" (0.6 cm) recommended with foot. 15/16" to 1
(2.2 cm to 2.9 cm) allowable without foot.
H. Recommended junction box location
I.
4
5
"-32" (11.7-81.3 cm) bottom of cutout to floor
8
J. 25" (63.5 cm) minimum depth of cutout
*Cleats and spacers must be recessed 1
front of the cabinet
.
Side View
A
C
F
G
J
H
I
1
"
8
" (3.5 cm) from the
3
8
3 of 18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Woes7030pz

Table of Contents