Table of Contents
Advertisement
en Appliance care
Remove the stopper from the re-
1.
cess in the top.
Insert the stopper on the under-
2.
side.
Clean the filter in the condensation
3.
container.
18.2 Calling up the appliance
care programme
Requirement: The appliance care
programme is ready.
→ "Preparing for appliance care",
Page 47
Press
.
1.
The switch-on process takes a few
seconds.
Press and hold
2.
prox. 3 seconds.
Press the required cleaning pro-
3.
gramme:
Basic appliance care pro-
‒
gramme
48
3 sek. for ap-
Intensive appliance care pro-
‒
gramme
18.3 Running the basic appli-
ance care programme
To remove any dirt deposits in the
appliance, you can run the basic ap-
pliance care programme.
Notes
¡ The basic appliance care pro-
gramme runs for approximately
1 hour.
¡ After a lengthy period of use, the
appliance reminds you to run the
basic appliance care programme.
Before the programme starts or
after the programme has ended,
the display shows the message
"Basic machine care required.
" . This message appears re-
peatedly until you have run the ba-
sic appliance care programme
through to the end.
Requirements
¡ The appliance care programme is
ready.
→ "Preparing for appliance care",
Page 47
¡ The simple appliance care pro-
gramme is now called up.
→ "Calling up the appliance care
programme", Page 48
Pour approx. 1.5 litres of hot tap
1.
water into the condensation con-
tainer.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
2.
so that it locks into place.
Press
.
3.
a The appliance care programme
starts and a signal tone sounds.
Advertisement
Table of Contents
