Table of Contents
Advertisement
© National Instruments Corporation
Figure 2-16. Switch Location on the NI PXI-783 x R
ON
1 2 3
a. Normal Operation (Default)
Complete the following steps to prevent a VI stored in flash memory from
loading to the FPGA:
1.
Power off and unplug the PXI/CompactPCI chassis or PCI computer.
2.
Remove the NI 781xR/783xR from the PXI/CompactPCI chassis or
PCI computer.
Chapter 2
SW1, SW2, SW3
b. Prevent VI From Loading
Figure 2-17. Switch Settings
2-27
Hardware Overview of the NI 78xxR
ON
1 2 3
R Series Intelligent DAQ User Manual
Advertisement
Table of Contents
