For Base Radio) - GMC Sierra Denali 1500 2023 Owner's Manual

Audio System
When using the Bluetooth mobile device
system, sound comes through the vehicle's
front audio system speakers and overrides
the audio system. The volume level while on
a mobile device call can be adjusted by
pressing the steering wheel controls or the
volume controls for the infotainment
system. The adjusted volume level remains
in memory for later calls. The volume
cannot be lowered beyond a certain level.
Bluetooth (Pairing and Using a
Phone for Base Radio)
Pairing
A Bluetooth-enabled cell phone must be
paired to the Bluetooth system and then
connected to the vehicle before it can be
used. See the cell phone manufacturer's user
guide for Bluetooth functions before pairing
the cell phone.
Pairing Information
A Bluetooth phone with music capability
can be paired to the vehicle as a phone
and a music player at the same time.
Up to 10 devices can be paired to the
Bluetooth system.
The pairing process is disabled when the
vehicle is moving.
Pairing only needs to be completed once,
unless the pairing information on the cell
phone changes or the cell phone is
deleted from the system.
If multiple paired cell phones are within
range of the system, the system connects
to the paired cell phone that is set to
First to Connect. If there is no phone set
to First to Connect, it will link to the
device which was used last. To link to a
different paired phone, see Linking to a
Different Phone later in this section.
Pairing a Phone
1. Make sure Bluetooth has been enabled
on the cell phone before starting pairing.
2. Touch the PHONE icon on the Home
Page or the phone shortcut on the
applications tray at the bottom of the
screen.
3. Touch Phone at the top of the
infotainment display. There may also be
an Add option in the middle of the
Phone screen. Touching this Add Phone
option will shortcut to the Phone
List menu.
4. Touch Add Phone.
Infotainment System
5. Select the vehicle name shown on the
infotainment display from your phone s
Bluetooth Settings list.
6. Follow the instructions on the cell phone
to confirm the six-digit code shown on
the infotainment display and touch Pair.
7. Start the pairing process on the cell
phone to be paired to the vehicle. See
the cell phone manufacturer's user guide
for information on this process. Once the
cell phone is paired, it will show under
Connected.
8. If the vehicle does not appear on your
phone, there are a few ways to start the
pairing process over:
Turn the phone off and then back on.
Go back to the beginning of the
Phone menus on the infotainment
display and restart the pairing
process.
Reset the phone, but this step should
be done as a last effort.
9. If the phone prompts to accept
connection or allow phone book
download, select Always Accept and
Allow. The phone book may not be
available if not accepted.
169