Table of Contents
Advertisement
F I RST U S E
1
Rinse water tank at first.
Fill water tank with fresh, drinking water. insert
water tank to machine.
4
ON
Switch machine on. Power button starts
blinking red while machine is heating up for
approx. 40 seconds. Afterwards power button
lights steady green and machine is ready.
7
~60 sec
Push selection lever to the "HOT" position.
Machine starts rinsing.
2
Open locking handle and insert empty capsule
holder. Close locking handle.
Place jug under outlet.
5
40 sec
~60 sec
Push selection lever to the "COLD" position.
Machine starts rinsing.
8
STOP
After approx. 60 seconds push selection lever
to the "STOP" position. Empty jug and refill
water tank with fresh, drinking water.
3
Make sure that the selection lever is in "STOP"
position. Then plug the power plug into a
mains power socket.
6
After approx. 60 seconds push selection lever
to the "STOP" position. Machine stops rins-
ing and power button blinks red for about 5
seconds.
9
Place drip grid on drip tray. Then insert drip
tray at desired position of machine.
8
STOP
STOP
Advertisement
Table of Contents
