Table of Contents
Advertisement
7. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle
Check Pattern and click Print.
8. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 6 hours. Then check the print head nozzles and try cleaning the print head again, if necessary.
Parent topic:
Print Head Cleaning
Related concepts
Print Head Nozzle Check
Power Cleaning
Related tasks
Removing and Installing Ink Cartridges
Loading Paper in Cassette 2 (Lower Cassette)
Cleaning the Print Head Using the Product Control Panel
264
Advertisement
Table of Contents
