Yamaha YZ125 2016 Owner's Service Manual page 137

13. Install:
• Engine stop switch "1"
Engine stop switch:
0.5 Nm (0.05 m•kg, 0.36
ft•lb)
• Clutch lever holder "2"
• Bolt (clutch lever holder) "3"
Bolt (clutch lever holder):
5 Nm (0.5 m•kg, 3.6
ft•lb)
• Clamp "4"
• The engine stop switch, clutch lever
holder and clamp should be in-
stalled according to the dimensions
shown.
• Pass the engine stop switch lead in
the middle of the clutch lever hold-
er.
0 mm
(0 in)
0 mm
(0 in)
14. Install:
• Clutch cable "1"
Apply the lithium soap base grease
on the clutch cable end.
15. Adjust:
• Clutch lever free play
Refer to "ADJUSTING THE
CLUTCH LEVER FREE PLAY"
section in the CHAPTER 3.
5-28
HANDLEBAR