Sony DVP-NS75H Operating Instructions Manual page 55

"_° Hints
• To repeat both MP3 audio tracks and JPEG image
files in a single Mbum, repeat the same MP3 audio
track or albmn when "MODE (MP3, JPEG)" is set
to "AUTO." See "Playing repeatedly (Repeat
Pla_9" (page 32) to repeat the track or albmn.
• The player recognizes a maxinlmn of 200 albmns
regardless of the selected mode Of each albmn,
the player recognizes up to 300 MP3 audio tlacks
and 300 JPEG image files when "AUTO" is
selected, 600 MP3 audio tracks when "AUDIO
(MP3)" is selected, 600 JPEG image files when
"IMAGE (JPEG)" is selected.
• SLOW 1: sets a duration longer than
NORMAL.
• SLOW 2: sets a duration longer than
SLOW 1.
4
Press ENTER.
J I_[TIFf
Some JPEG files, especially progressive JPEG files
or JPEG files of 3,000,000 pixels or more, may take
longer to display than others, which may make the
duration seem longer than the setting you selected.
• This fimction does not work if the MP3 audio
tracks and JPEG image files are not placed in the
same albmn
• If playing time of JPEG image or MP3 audio is
longer than the other, the longer one continues
without sound or image.
• If you play large MP3 track data and JPEG image
data at the same time, the somld nmy skip. It is
recommended that you set the MP3 bit rate to 128
kbps or lower when creating the file. If the somld
still skips, then reduce the size of the JPEG file.
Setting the pace for a slide show
(INTERVAL)
Yon can set the time the slides are displayed
on the screen.
1
Press DISPLAYtwice while viewing a
JPEGimage or when the player is in
stop mode.
The (ontrol Menu appears.
2 Press4"/,I, to select
(INTERVAL), then press ENTER.
The options lbr "INTERVAL" appear.
Press 4"/,1,to select a setting.
The default setting is underlined.
• NORMAL: sets the dnration to between
6 to 9 seconds.
• FAST: sets a dnration shorter than
NORMAL.
Selecting the slides' appearance
(EFFECT)
You can select the way the slides are
displayed during a slide show.
1
Press DISPLAYtwice while viewing a
JPEGimage or when the player is in
stop mode.
2
Press4"14,toselect (EFFECT), _
then press ENTER.
The options lbr "EFFECT" appear.
3
4
Press 4"/4, to select a setting.
The defauh setting is underlined.
MODE 1: the image sweeps in from top
to bottom.
MODE 2: the image sweeps in from left
to right.
MODE 3: the image stretches out from
the center of the screen.
MODE 4: the images randomly cycle
through the effects.
MODE 5:the next image slides over the
previous image.
OFF: turns oft"this function.
Press ENTER.
==
g
g
==
g
55