Sony DVP-NS75H Operating Instructions Manual page 4

• Neverplace the set in a
confined space, such as a
bookcase, or built-in
cabinet, unless prope_
ventilation is provided.
• Do not place the set near or
over a radiator or beat
register, or where it is
exposed to direct stmlight.
Antennas
[
Outdoor antenna grounding
If an o/rtdoor anteima or cable system is installed,
follow the precautions below
An outdoor antmma system should not be located in tbe
vicinity, of overhead power lines or otber electric light
or power circuits, or where it can come in contact with
such power lines or circmts
WHEN INSTALLING AN OUTDOOR ANTENNA
SYSTEM, EXTREME (?ARE SHOULD BE TAKEN
TO KEEP FROM CONTACTING SUCH POWER
LINES OR (-IRCUITS AS CONTA(- T WITH THEM
IS ALMOST INVARIABLY FATAL
Be sure the antemm system is grounded so as to provide
sonic protection against voltage stages and built-up static
charges. Section 810 of the National Electrical (-:ode
provides mlbmmtion with respect to proper mounding of
the lllast and suppol_ing smlcnue grmmding of the lea&in
wire to an antetma discMrge refit size of gtotmding
conductors, location of antemm-dischalge refit, comiection
to N ounding electrodes, and requirements tbr tbe
_-ouildnig electrode
Antenna Grounding According to the
National Electrical Code
• Antenna Discharge unit
(NED Section 810-20)
Grounding Conductors
(NED Section 810-21)
Ground Clamps
Power Service Grounding
Electrode System
(NEC Art 250 Part H
NEC-NATIONAL ELECTRICAL CODE
Lightning
For added protection fol this set dinins a lightning
storln, or when it is left unattended and unused for long
periods of tilne, unplug it froln tbe wall outlet and
discommct the antenna or cable system. This will
prevent damage to the set due to lightning and power-
line surges
Service
Damage Requiring Service
Unplug the set from the wall outlet and _efer smvicing
to qualified service personnel under tbe following
conditions:
• \Vhen tbe power cord oi plug is _-11==_4_=
damaged or flax ed -ai/,_avtD oRTaut
cRa_ J'EI9 "¥_UG
• If liquid has been spilled or
objects have fallen into the
set
• If the set has been exposed
to rain or water.
• If the set has been _ _
subject to excessive
shock b? being
dropped, or tbe cabinet
bas been damaged.
• If the set does not opmate
normall 3 wben following ¢ ( '_ _
the operating instructions
Adjust onlx those controls
that ale specified in the
operating instructions. Improper a@lstment
of other controls may result in damage and
will often require extensive work by a
qualified technician to restore the set to normal
operation.
• When the set exhibits a distinct change in
perfbrmance - this indicates a need for selwice
Servicing
Do not attenlpt to
smvice
the set
yourself as opening or relnoving
covers may expose you to
dangerous voltage or otber
hazards
Refer all selwicmg to qualified selwice persmmel
Replacement parts
When replacement parts are re_fired, be sure the
selMce technician has used replacement pal_s specified
by the manufacturer that have the same characteristics
as tbe original parts.
Unauthorized substitutions may result in fire, electric
shock, or other hazards
Safety Check
Upon COlnpletion of any service o*
repairs to the set, ask tbe sela'ice
teclmician to perform routine
safety checks (as specified by the
manufacturer) to determine that
the set is in safe operating
condition