IBM 3270 Manual page 36

0
Connect one end of a pair cable to the R and GN terminals of the four-pin recepta-
cle
D
Connect the opposite end to the DS terminals of the PD-1 A.
0
Connect one end of another pair cable to the Y and BK terminals of the four-pin
receptacle
0
and the opposite end to the DR terminals of the PD-1 A.
Four-pin Receptacle
D
PD-1A
_L
~~}os
~===:=t~~}
DR
J_
To Nonswitched
Line
J_
D
Attach the four-pin receptacle
g,
using the two screws supplied, to a place that is
is convenient to connect the communication cable from the 3276.
D
Plug the four-prong plug attached to the communication cable marked NON-
SWITCHED into the four-pin receptacle connected to the nonswitched line.
LJ
Label-NONSWITCHED
To Nonswitched
Line
25