The Singing Machine STVG-989 Instruction Manual page 18

TROUBLE SHOOTING GUIDE
PROBLEM
No sound - If audio is
connected to TV or
VCR.
No song lyrics appear
on screen.
Image is blurry.
POSSIBLE CAUSE
Source Selection on TV or
VCR is not correct.
Patch cords are not
connected securely.
Video cable is not connected
properly to the TV.
Source selector on TV is not
set to VIDEO.
TV does not have video line
input.
A CDG is loaded but the
CDG indicator is not lit.
Source selector on TV is not
set to VIDEO.
Source selector on TV is not
set to VIDEO.
Camera has not warmed up.
Camera lens is dirty.
Camera lens is out of focus.
17
SOLUTION
Follow directions on page E7 for
"Making the Connections".
Ensure white and red patch cords
are securely inserted into both
The Singing Machine and the
TV/VCR.
Connect the video cable to the
Singing Machine's VIDEO OUT
and to the TV VIDEO IN.
Using your TV remote to select
VIDEO input.
Connect from VIDEO OUT of the
system to the VIDEO IN of your
VCR or connect to an RF
Modulator and then to the TV
cable input. Refer to "Making the
Connections" on page E7.
Check the disc to be sure it is a
CDG. (See page E20 for details.)
Check disc to be sure it is clean.
(See page E15 for cleaning
instructions.)
Use your TV remote to select
VIDEO input. (Refer to page E8
under Common ways to configure
your TV or VCR)
Use your TV remote to select the
proper VIDEO input or select the
proper VIDEO input on the TV
itself. (Refer to page E8 under
Common ways to configure your
TV or VCR)
Wait a minute for the camera to
warm up.
Clean the camera lens.
Adjust the lens of the camera by
slightly rotating either left or right
until the display is clear. Do not
overturn the lens.