The Singing Machine STVG-989 Instruction Manual page 10

MAKING THE CONNECTIONS
CONNECTING A VIDEO COMPONENT FOR INPUT
Please follow the steps below to display CDG lyrics on the Singing Machine's monitor from
another video source:
(1) Locate the multicolored patch cords.
(2) Connect video cable (yellow) to the Video In on the back of the Singing Machine.
(3) Connect the other end of the Video Cable (yellow) to the Video Output on another video
source such as a VCR.
(4) Set the FUNCTION Selector switch to AUX and the MONITOR Selector switch to
CDG/AUX.
(5) Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of
the Singing Machine to have the best picture quality.
VIDEO INPUT
(Yellow Jack)
AUDIO CONNECTION
Connect the unit to your TV or home stereo system using the White and Red connections on the
supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on the
unit. Plug the red end of the patch cord into the red AUX OUT jack on unit. Now connect the other
end of the cable's white (left channel) and red (right channel) plugs to your TV or home stereo
system's 'AUDIO IN' or 'AUX IN' jacks.
AUX OUTPUT
L
(White Jack)
AUX OUTPUT
R
(Red Jack)
REAR VIEW OF
SINGING MACHINE
AUX
IN OUT IN
L
VIDEO
R
OUT
VIDEO OUTPUT
REAR VIEW OF
SINGING MACHINE
AUX
OUT IN
L
R
9
REAR VIEW OF VCR
VIDEO AUDIO
OUT
R
(Yellow Jack)
REAR VIEW OF TV
VIDEO AUDIO
INPUT INPUT
R
AUDIO INPUT AUDIO INPUT
R
(Red Jack)
OUT
L
L
L
(White Jack)