Sony UP-860 Service Manual page 7

1-3,
PRECAUTIONS
On safety
Check the operating voltage before operation
Operate the unit only with a power source specified in "Specifications".
Stop operation immediately if any liquid or solid object falls into the cabinet.
Unplug the unit and have it checked by qualified personnel.
Unplug the unit from the wall outlet if you will not be using it for a long time.
Disconnect the cord by grasping the plug. Never pull the cord itself.
Do not disassemble the cabinet.
Refer servicing to qualified personnel only.
Do not touch the cutting blade of the printer.
Connect the power plug of the printer to the wall outlet having protective earth
terminal.
The safety earth should be properly established.
On operation
Do not turn the power off while the printer is printing.
Otherwise, the thermal head may be damaged.
On printer carriage
On installation
Provide adequate air circulation to prevent heat build-up.
Do not place the unit on surfaces such as rugs, blankets, etc., or near materials such as
curtains and draperies.
Place the printer on a level, stable surface during operation.
Do not install the printer near heat sources. Avoid locations near radiators or air ducts, or
place subject to direct sunlight or excessive dust, humidity, mechanical shock or
vibration.