Sony UP-860 Service Manual page 11

SCAN switches
By setting the switches to the appropriate position, the printout range can be
widened in the NORM — WIDE 1 —- WIDE2.
To print only the image displayed on the standard screen size of the video
monitor, set the SCAN switch [8] to NORM. To print when the signal scans
beyond the edge of the standard monitor screen, set the SCAN switch [8] to
WIDE 1 or the SCAN switch [7] to WIDE 2. When you select the WIDE 2
position, WIDE 2 is selected regardiess of the setting of the SCAN DIP switch
{8]
Lees
[9] INPUT switch
Set this switch to OFF (COLOR) when the input signal to be printed is a color
signal. Set it to ON (B & W) when the signal is a black and white signal.
75Q switch
Set this switch to OFF when you connect video equipment to the VIDEO OUT
connector.
Set this switch to ON when you do not connect video equipment to the VIDEO
OUT connecter.
When you want to connect two printers to the video equipment, set either of the
two printer's 75Q switch to ON, and the switch of the other to OFF.
oat WV