Table of Contents
Advertisement
Assign IRQ for VGA
Lets the user choose which IRQ to assign for VGA card.
Assign IRQ for USB
Set to Enabled when USB port will be used. Set to Disable if the USB
port will not be used.
Used MEM base addr
Lets the user choose the Legacy ISA addr. The settings are NA#,
C800, CC00, D000, D400, D800 or DC00.
Used MEM Length
Select a length for the memory area specified in the previous field.
The setting are 8K, 16K, 32K, or 64K.
This Main Menu item loads the default system values. If the CMOS
is corrupted the defaults are loaded automatically. Choose this item and the
following message appears:
To use the Setup defaults, change the prompt to "Y" and press < Enter >
Note:
The Setup defaults can be customized to increase performance.
However the BIOS defaults can always be used as a back up if
there is some problem with the mainboard operation.
" Load Setup Defaults (Y / N) ? N "
3-27
®
Advertisement
Table of Contents
