MSI MICRO ATX EX7 Manual page 73

You can manually configure the PCI Device's IRQ. The following
pages tell you the options of each item & describe the meanings of each
options.
PnP OS Installed
Resources Controlled By
Reset Configuration Data :Disabled
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10assigned to
IRQ-11assigned to
IRQ-12assigned to
IRQ-14assigned to
IRQ-15assigned to
DMA-0assigned to
DMA-1assigned to
DMA-3assigned to
DMA-5assigned to
DMA-6assigned to
DMA-7assigned to
PnP OS Installed
When set to YES, BIOS will only initialize the PnP cards used for
booting (VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP
operating system like Windows
initialize all the PnP cards. So, for non-PnP operating system (DOS,
®
Netware ), this option must set to NO.
ROM PCI/ISA BIOS (2A69JM49)
PNP/PCI CONFIGURATION SETUP
AWARD SOFTWARE, INC.
:No
:Manual
:Legacy ISA
:Legacy ISA
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
:PCI/ISA PnP
®
95 or 98. When set to NO, BIOS will
3-24
PCI IDE IRQ Map To : PCI-Auto
Primary IDE INT#
Secondary IDE INT# : B
Assign IRQ for VGA
Assign IRQ for USB
Used MEM base addr
↑ ↓ → ← : Select item
Esc : Quit
F1 : Help PU/PD/+/- : modify
F5 : Old Value(Shift) F2 : Color
F7 : Load Setup Defaults
®
: A
: Enabled
: Enabled
: N/A