Electrolux EW8TN3362C User Manual page 24

11.4 Liquid or powder detergent
1
CLICK
3
• Position A for powder detergent (factory
setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid
detergents.
• Do not put more liquid then the
maximum level.
• Do not set the delay start function.
11.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme.
The indicator of the Start/Pauza
flashes.
The display shows an indicative programme
duration.
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The related
indicators illuminate on the display and
the given information changes
accordingly.
24 ENGLISH
2
4
CLICK
If a selection is not possible an acoustic
signal sounds and the display shows
11.6 Starting a programme
Touch the Start/Pauza
programme. It is not possible to start the
programme when the indicator of the button
is off and doesn't flash (e.g. programme dial
on a wrong position).
The related indicator stops flashing and stays
on.
The programme starts, the lid is locked. The
button
display shows the indicator
The drain pump can operate shortly
before the appliance fills water.
11.7 Starting a programme with the
delay start
1. Touch the Odložený start button repeatedly
until the display shows the desired delay
time. On the display the indicator shows
2. Touch the Start/Pauza
appliance lid locks and starts the countdown
A
.
B
button to start the
.
.
button. The