Electrolux EW8TN3362C User Manual page 14

Table of Contents

Advertisement

If you touch the Start/Pauza
the appliance performs the spinning phase
and drains the water.
The appliance empties the water out
automatically after 18 hours
approximately.
• Activate the Noční režim
The intermediate and the final spinning
phases are suppressed and the
programme ends with water in the drum.
This helps to reduce creasing.
The display shows the indicator
lid stays locked. The drum turns regularly
to reduce creasing. You must drain the
water to unlock the lid.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available. In
some programmes the rinses are
performed with more water.
If you touch the Start/Pauza
appliance performs the only draining
phase.
The appliance empties the water out
automatically after 18 hours
approximately.
7.5 Předpírka
With this option you can add a prewash
phase to a washing programme.
The corresponding indicator above the touch
button illuminates.
Use this option to add a pre-wash phase at
30 °C before the washing phase.
This option is recommended for heavily soiled
laundry, especially if containing sand, dust,
mud and other solid particles.
The option can increase the programme
duration.
7.6 Skvrny
Touch this button to add the stain phase to a
programme.
14
ENGLISH
The corresponding indicator above the touch
button,
button illuminates.
Use this option for laundry with hard stains to
remove.
When you set this option, put the stain
remover into compartment
The stain remover is pre-mixed and heated
with detergent in order to improve its
option.
effectiveness.
This option increases the programme
duration.
. The
This option is not available with a
temperature lower than 40 °C.
7.7 Permanent Extra máchání
With this option you can add a few rinses
according to the selected washing
programme.
Use this option for people with allergies to
button, the
detergent residues and with sensitive skin.
This option increases the programme
duration.
The corresponding indicator above the touch
button illuminates and also stays permanently
on during next cycles until this option is
deactivated.
7.8 Permanent Jemné+
Set this option to optimise the fabric softener
distribution and improve fabric softness.
Recommended when you use fabric softener.
This option increases the programme
duration.
The corresponding indicator above the touch
button illuminates and also stays permanently
on during next cycles until this option is
deactivated.
.

Advertisement

Table of Contents
loading

Table of Contents