Sony BRAVIA KDL-32L5000 Operating Instructions Manual page 8

[] VIDEO IN 11
COMPONENT
IN 1
(1080p/1080i/
720p/480p/480i)/
L (MONO)-
AUDIO-R
This input port can be used as a composite video input (VIDEO 1) or as a
component video input (COMPONENT 1). For composite use, connect the yellow
jack to Y/Video for video and use audio L (mono) and R for audio signal. For
component connection, use Y, PB, PR for video signals and also connect the audio L
(mono) and R for audio signal.
This TV can auto detect and switch between the VIDEO 1 and COMPONENT 1
when VIDEO 1 or COMPONENT 1 is connected.
To set to auto detection, press MENU and go to the Setup settings. Select the
Video/Component 1 Selection option then set to Auto.
[]
COMPONENT
Component video provides better picture quality than the S Video and composite
IN 2
video.
(1080p/1080i/ Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
720p1480p1480i)l
L-AUDIO-R
[]
AUDIO OUT
Connects to the left and right audio input jacks of your analog audio equipment.
(FIX) L/R
You can use these outputs to listen to your TV's audio through your stereo system.
[] AC power cord Plug the cord into the nearest wall outlet.
[]
CABLE/
RF input that connects to your Cable or VHF/UHF antenna.
ANTENNA
8