Locating Inputs And Outputs - Sony BRAVIA KDL-32L5000 Operating Instructions Manual

Locating Inputs and Outputs
Side Panel
J
2
Hitlrrl!
i N
lIDEOv
@
'IDEO
I©
_UDIO
2
VIDEO I_
Rear Panel
®
®
t_
(n
o.
[] SERVICE This port is for service only.
[] HDMI IN 1/2/3 HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
L-AUDIO-R
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1 port when connecting DVI equipment. Use a DVI-to-HDMI
cable or adapter (not supplied). Equipment using a DVI connection also requires an
additional audio connection using an audio cable connected to AUDIO (L/R).
[] VIDEO IN 2 Connects to the S VIDEO output jack of video equipment. If both composite video
S VIDEO and S VIDEO are connected, S VIDEO signal has priority.
VIDEO/L If you have mono equipment, connect its audio output port to the TV's L (MONO)
(MONO)- audio input port. Use VIDEO IN 2 with AUDIO L (mono) and R.
AUDIO-R
[] PC IN Connects to a personal computer's video and audio output connector. Can also be
(RGB/AUDIO) connected to other analog RGB equipment. See "PC Input Signal Reference Chart"
on page 37 for the signals that can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD 15-HD 15 cable.
You may need to adjust the TV settings or your PC's resolution and timing. See
page 11 for information on how to setup your PC to this TV.
[] DiGiTALAUDi6 Connecis io ihe opiicai audio inpui of a digiiai audio equipmeniihai is..................................
OUT (OPTICAL) PCM/Dolby '_ Digital compatible.
_ Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
(Continued)
7