Reversing Handles/Doors - LG LDNS22220 Series Owner's Manual

18 INSTALLATION

Reversing Handles/Doors

Door reversal must be done by an authorized
installer or service person. If it is not, the doors will
not be covered by the warranty.
Reversing the Refrigerator Handle
1
Loosen the set screws
mm) Allen wrench, and remove the handle.
2
Loosen the mounting fasteners
connect to the refrigerator door and handle
using a 1/4 in. (6.35 mm) Allen wrench, and
remove the mounting fasteners.
3
Carefully rotate the decorative screw covers
counterclockwise with your fingers until
c
they loosen and fall out. Once they're
removed, install the covers in the screw holes
on the opposite side.
d
with a 3/32 in. (2.5
a
that
b
4
Attach the mounting fasteners
opposite side of the door using a 1/4 in. (6.35
mm) Allen wrench.
5
Place the handle on the door by fitting the
handle footprints over the mounting
fasteners and tightening the set screws
b
with a 3/32 in. (2.5 mm) Allen wrench.
Reversing Doors
1
Remove the top hinge cover screws
flat-head screwdriver to release the tabs
inside the front of the cover at the bottom
Remove the cover.
2
Type A
• Rotate the hinge lever
top hinge free of the hinge lever latch
d
Type B
to the
b
a
. Use a
a
.
b
clockwise. Lift the
c
.
e