LG LDNS22220 Series Owner's Manual page 20

20 INSTALLATION
9
Flip the middle hinge bracket
it on the left side of refrigerator. Insert two
Allen-head screws
screw .
b
10
Insert the hinge pin
mm) socket wrench.
NOTE
• The bracket has been flipped, but the hinge
b
pin stays in the same orientation with its
a
hexagonal end facing upward.
11
Insert the decorative screw
hole on the flange along the right front side.
Insert the cover
b
on the right side. The cover is force-fitted.
12
Loosen the two screws and remove the left
hinge cap.
and position
a
and the Phillips-head
c
using a 1/4 in. (6.35
a
into the outer
a
over the 2 open bolt holes
13
Place the refrigerator door down over the
hinge pin on the middle hinge pin bracket.
NOTE
• The left top hinge, right hinge cap, and left hinge
cover are provided for reversing doors.
14
Type A
• Fit the hinge
a
and slot it into place. Rotate the lever
clockwise to secure the hinge. Assemble the
left hinge cover with the two screws
Type B
• Line up the left top hinge with the holes in
the top of the refrigerator. Use the three
bolts to replace the hinge. Assemble the left
hinge cover with the two screws.
15
Assemble the right hinge cap with the two
screws.
over the hinge lever latch
d
b
c
.