Programming The Remote Control Code - Panasonic TC-26LX20 Operating Instructions Manual

Programming the remote control code
You can operate other manufacturers' components using this TV's remote control.
Preparation:
Connect the plug of the external component to the wall outlet.
® Make sure the component is turned eff,
RECALL PAGE GUIDE
® ®®
® ®®
Panasonic
TV
/
1
2
Press and hold POWER and
OK together, for at least 5
eeeorlde
® The mode selection
buttons flashes, and then
release the POWER and
OK
Select the type ef the
component.
® The selected button light
and all ethers go eut.
Enter the 3 digit infrared code
(see pages 34-36).
® Faclory default setting :
Panasonic
® Press POWER to test the
operation.
Notes:
, If the component does not operate with the remote control,
repeat the procedure using another code. (Some brands have
multiple codes).
, If an incorrect code is entered, or if the procedure takes longer
than 30 seconds, the programming will fail.
To find the code not lusted in the Uncle×
After step 2 above,
_ ress to select the code.
, The code starts from the current device.
, Press POWER button to test the operation.
, Repeat the steps until the component code is
found. It may take many attempts before the
correct code is feun&
Press to store the code,
33