Operating Peripheral Equipment Using The Remote Control; Programming The Remote Control Code - Panasonic TC-22LH30 Operating Instructions Manual

Operating peripheral equipment using the remote control

Programming the remote control code

You can operate other manufacturers' components using this TV's remote control.
Preparations:
• Connect the plug of the external component to the wall outlet.
• Make sure the component is turned off.
POWER
CH
O K
VOL VOL
CH
MENU
TV/VIDEO RECALL MUTE
1 2
4 5
7 8
R-TUNE
0
PLAY
REW
PAUSE STOP
ASPECT
VCR/DBS CH
TV/VCR
T V
26
1
SAP
2
RETURN
EXIT
GUIDE
3
3
6
Notes:
9
• If the component does not operate with the remote control, repeat
SLEEP
the procedure using another code. (Some brands have multiple
PROG
codes).
• If an incorrect code is entered, or if the procedure takes longer
FF
than 30 seconds, the programming will fail.
REC
To find the code not listed in the index
After step 2 above,
CH
O K
+
POWER
VOL VOL
CH
1 2 3
4 5 6
7 8 9
0
Press to select the code.
• The code starts from the current device.
• Press POWER button to test the operation.
• Repeat the steps until the component code is
found. It may take many attempts before the
correct code is found.
Press to store the code.
Press and hold POWER and
OK together, for at least 5
seconds.
• The mode selection buttons
flashes, and then release the
POWER and OK.
Select the type of the component.
• The selected button light and all
others go out.
Enter the 3-digit infrared code
(see pages 27, 28).
• Factory default setting :
Panasonic
• Press POWER to test the
operation.