Operating Peripheral Equipment Using The Remote Control; Programming The Remote Control Code - Panasonic TC-26LX50 Operating Instructions Manual

Operating peripheral equipment using the remote control

Programming the remote control code

You can operate other manufacturers' components using this TV's remote control.
Preparations:
• Connect the plug of the external component to the wall outlet.
• Make sure the component is turned off.
SAP
POWER
CH
O K
VOL VOL
CH
RETURN
MENU
EXIT
TV/VIDEO RECALL MUTE GUIDE
1 2 3
4 5 6
7 8 9
SLEEP
R-TUNE PROG
0
PLAY
REW FF
REC
PAUSE STOP
ASPECT
VCR/DBS CH
TV/VCR
T V
1
CH
O K
+
POWER
VOL VOL
CH
2
3
1 2 3
4 5 6
7 8 9
0
Notes:
• If the component does not operate with the remote control, repeat
the procedure using another code. (Some brands have multiple
codes).
• If an incorrect code is entered, or if the procedure takes longer
than 30 seconds, the programming will fail.
To find a code not listed in the index
After step 2 above,
Press to select the code.
• A potential code is loaded for the device selected in step 2.
• Press POWER button to test the operation.
• Repeat the steps until the component code is
found. It may take many attempts before the
correct code is found.
Press to store the code.
Press and hold POWER and
OK together, for at least 5
seconds.
• The mode selection buttons
flash, then release POWER
and OK.
Select the type of the component.
• The selected button lights and
all others go out.
Enter the 3-digit infrared code
(see pages 28, 29).
• Factory default setting:
Panasonic
• Press POWER to test the
operation.
27