Table of Contents
Advertisement
2569.1 en
08-11-2006
EN
TV menu
Installation
Languages
Channels
Preferences
Connections
Factory settings
Software upgrade
Info
50
12:21
Pagina 50
Annex 1 (Continued)
Manual software upgrade procedure
For a manual software upgrade copy the "autorun.upg" file
in a directory called "Upgrades" located in the root of the
USB portable memory.
Rename this file as "firmware_upgrade.upg".
Software upgrade
1. Insert the portable memory that contains the downloaded
Current softw. info
software upgrade.
2. Select Software upgrade in the Installation menu. Go to
Local upgrades
Local upgrades.
Announcement
The TV will list all compatible software available on the USB
portable memory and display the data for each selected
upgrade version.
3. Select the correct upgrade version and press the red colour
key to start the upgrade.
Your TV will restart and will automatically go to the upgrade
mode. After a few seconds it will display the status of the
upgrade procedure.
Warning: if you try to upgrade to a software version
equal or lower than the current version, a confirmation
will be asked. Downgrading to older software should only
be done in case of real necessity.
4. When the software upgrade was successful, remove the USB
portable memory and restart your TV with the power
switch B at the side of the TV.Your TV will start up with
the new software.
Advertisement
Table of Contents
