Table of Contents
Advertisement
2569.1 en
08-11-2006
Symptom
The remote of
connected equip-
ment does not
function well
No photo or music < Verify if the source complies with a supported code.
play or in poor
quality
No stable or not
synchronised VGA
picture
No solution found
for your picture or
sound problem
Red blinking led
12:21
Pagina 47
Troubleshooting (Continued)
Possible cause/Remedy
< The infrared signals of the screen may influence the reception sensibility
of other peripherals.
Solution: replace the batteries of the remote of other peripheral
equipment.
< Verify if you have selected the correct VGA mode in your PC.
See Connect a PC, p. 42.
< Verify the connections between the PC and the TV.
< Switch off your TV off and then on again once.
Never attempt to repair a defective TV yourself.
Verify with your dealer or call a TV technician.
< Unplug the mains cord for 10 seconds and insert it in again.
EN
47
Advertisement
Table of Contents
