Table of Contents
Advertisement
2569.1 en
08-11-2006
How to search for and store TV channels (Continued)
TV menu/Installation
Channels
Autom. installation
Manual installation
Rearrange
Info
12:21
Pagina 23
Manual installation
This gives you the possibility to manually install (tuning-in
Manual installation
channel by channel) TV channels.
System
Search
1. Select Manual installation and press the cursor right.
2. Select System.
Fine tune
3. Select Search and press the cursor right.
Store current chan.
4. Select the red or green colour key to proceed.
Store as new chan.
Tip: if you know the frequency, enter the 3 digits of the
frequency with the digit keys 0 to 9 (For example, 049).
5. Press the cursor left to store the channel found or to
search for another channel.
6. Select Fine tune and press the cursor right.
Fine tuning can be useful when the frequency has shifted a
bit or when interference of another frequency occurs.
Adjust the frequency with the cursor up/down in case of
poor reception of the channel found.
7. Select Store current channel if you want to store the
(fine tuned) frequency under the current channel number.
Press the cursor right and confirm with the ok key.
8. Select Store as new channel if you want to store the
(fine tuned) frequency under a new channel number.
Press the cursor right and confirm with the ok key.
9. Use the rearrange menu to rename or reshuffle the
channels. See next page.
Note: select System (PAL BG, PAL I, PAL DK or
NTSC M)
EN
23
Advertisement
Table of Contents
