Maintenance - Husqvarna YTH2148 Owner's Manual

MAINTENANCE
MAINTENANCE SCHEDULE _,_ _//__ _c_"
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation _
Check Tire Pressure
Check Operator Presence and
T Interlock Systems
R Check for Loose Fasteners
Sharpen/Replace Mower Blades
T Lubrication Chart
0 Check Battery Level
R Clean Battery and Terminals
Check Transaxle Cooling
Check WBelts
Check Engine Oil Level
Change Engine Oil (with oil filter)
E Change Engine Oil (without oil filter)
N
Glean Air Filter
G Clean Air Screen
Inspect Muffler/Spark Arrestor
E Replace Oil Filter (If equipped)
Glean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Oh_r_ge more often wher_ operating under a heavy Toad or
ir_high ambient temper'_ture_.
2 - Serv ce more often when operetirlg i# drb Z or dusty ¢orlditions.
GENERAL RECOMMENDATIONS
v'
v' v'
ii
!I
3 - Replace blades more often when mowii_g in sr_rldy soil.
4 Not requ red ii equipped with ma r_tenance4ree bettery.
5 Tighterl frorlt axle pivot bolt to 35 fL Ibm. rnaxim_fm.
0o not ovedighten.
LUBRICATION CHART
The warranly on this tractor does nct cover items that have
been subjected to operalor abuse or negligence. To receive
full value from the warranly, operator musl maintain tractor
as inslructed in this manual.
Some adjustmenls will need to be made periodically to
properly maintain your tractor.
AI least once a season, check to see if you should make
any of the adjuslments described in the Service and
Adjuslments section of this manual.
° AI least once a year you should replace the spark
plug, clean or replace air fiIter, and check blades and
belts lot wear. A new spark plug and clean air filter
assure proper air-fuel mixture and help your engine
run better and lasl longer.
PINDLE ZEBK _]",
%J
"/ WHEEL WHEEL
BEARING BEARING
ZEBK ZERK
BEFORE EACH USE
° Check engine oil Ievel.
, Check brake operation.
, Check tire pressure.
, Check operalor presence and
interlock syslems lor proper operation.
, Check for loose lasleners.
,.,_", General Purpose Grease
_) Refer to Maintenance '_ENGINE" Section
IMPORTANT: DO NOT OiL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS
LUBRICANTS WILL ATTRACT DUST AND DIRT THAT WILL
SHORTEN THE LIFE OFTHE SELF-LUBRICATING BEARINGS.
IFYOU FEELTHEY MUST BE LUBRICATED, USE ONLY A DRY,
POWDERED GRAPHITE TYPE LUBRICANT SPARINGLY
16