Playing Discs - Sony DVP-NS41P Operating Instructions Manual

Playing Discs
Depending on the DVD or VIDEO (D, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
|/_ _ _>
)
ENTER
d_ RETURN
i
ii
ii
:5
1 Turn on your TV.
2 Press I/_.
The player turns on.
3 Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
• When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sonnd from the player.
4
Press _ onthe player, and place a
disc on the disc tray.
J
P
5
Press _:>.
The disc tray closes. The player starts
playback (contimlous play). Acljust the
vohme on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 27. For VIDEO CDs,
see page 28.
To turn off the player
Press I/(_).The player enters standby mode.
"_° Hint
You can have the playe! ttu-n off"automatically
whenever you leave it in stop mode for mo_e than
30 minutes. To turn this fimction on or off_ set
"AUTO POWER OFF" in "CUSTOM SETUP" to
"ON" or "OFF" (page 61)
Notes on playing DTS sound tracks on a
DVD VIDEO
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL)jack.
• When you play a DVD VIDEO with DTS
sound tracks, set "DTS" to "ON" in
"AUDIO SETUP" (page 63).
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 63). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
24