Initial Set-Up; Using Menu System; Automatic Channel Set-Up - TCL L24D20FES Operation Manual

Initial Set-up

Initial set-up involves selecting all the settings required to
be able to search for and store all the channels you can
receive. Make sure that the television is switched on and
follow all the steps in turn specified hereafter.
Back Select
1. Press the up or down direction button to select the Scan
option and press the OK or right direction button to start
the search automatically. All available TV programmes
are stored. This operation takes a few minutes. The
display shows the progress of the search and the number
of programs found.
Note: To prevent the channel setup process from being
interrupted, wait for the message indicating that the setup
is complete.
In this step, you can also select Skip Scan to skip the
initial setup progress. But when you turn the TV on next
time, the Initial setup menu will still appear.
2. During the setup, user can follow the hints available at
the bottom of the screen to return to the last step by
pressing the left direction button. Or press Exit to exit
or interrupt the search halfway.
3. After initial setup is complete, press OK to exit. The
channels are arranged in a preset order. If you wish to
skip channels, modify the preset order or rename
channels, select Setup > Organiser and press the OK
or right direction button to enter.

Using Menu System

This section explores the menus of your TV. Each menu
is outlined and detailed to help you get the most from
your TV.
Picture Sound
USB Timer
To access the menu system:
1. Press the Menu button to display the main menu.
2. Press the up, down, left, right direction button to select
the desired item, then press the OK button to open the
corresponding submenu.
0%
Next EXIT Exit
PAP Options
Lock Setup
General Operation
3. In submenus, use the up or down direction button to
select menu options, use the left or right direction button
to set functions or change values. Use the OK button
to activate a setting. Use the OK or right direction button
to open the corresponding submenu.
4. Press Menu to return to the previous menu or press
Exit to close the menu.

Automatic Channel Set-up

This option allows the TV to search for, find and store all
the available analog and digital channels for the antenna
or cable input selected. F
hereafter.
1. Press the Menu button to display the main menu, and
select the Setup > Channel install, then press the OK
or right direction button to enter.
2. Select the Automatic search and press the OK or right
direction button to start the automatic search process.
The search may take a few minutes. During the process,
you can press Menu or Exit to abort halfway.
3. Once the automatic search ends, press the Menu button
to return to the last step or press OK to restart your
channel search.
4. After the automatic search, channels are arranged in a
preset order. You can skip channels, modify the preset
order or rename channels, select Setup >Organiser
and press the OK or right direction button to enter.
Skipping channels: If a channel was stored twice or its
reception is poor, you can simply skip it. The skipped
channels can not be selected by pressing the
PROGRAM UP /DOWN button.
Select the Channel skip option and press the OK or
right direction button to display Channel skip menu.
Press the up or down direction button to select a
channel and press the OK button to check the box.
8
ollow all the steps in turn specified