Table of Contents
Advertisement
Setting the Timer
The Timer menu allows you to set the time zone on your
TV set, to programme an automatic turn-off or wake-up
timer and to view the calendar.
Display main menu by pressing Menu. Select Timer and
press OK to confirm. The Timer options are as below:
Time zone: Use the left or right direction button to select
the local zone.
Daylight saving: Use the left or right direction button to
choose between Off and On modes.
Clock: press the OK or right direction button to display
its options:
Auto-synchronization: use the left or right direction
button to select On or Off. If On selected, the TV will
get the time automatically from DTV signals, and the
Time item cannot be adjusted. If you select Off, you
should set time at Time item. Highlight Time, use the
left or right direction button to select input space, enter
the current time using the digit keys.
Note: If Off selected, the time set in Time option will not
be memorized when turning on the TV next time, and
the TV 's time will start from the default.
Power on timer: use the left or right direction button to
select On or Off. If you select On, you should set a time
period after which the TV automatically switches to on
at Time item. Highlight Time, use the left or right
direction button to select input space, enter the current
time using the digit keys.
Power off timer: use the left or right direction button to
select On or Off. If you select On, you should set a time
period after which the TV automatically switches to off
at Time item. Highlight Time, use the left or right
direction button to select input space, enter the current
time using the digit keys.
Sleep timer: sets a period of time after which the TV set
goes into standby mode. Use the left or right direction
button to set the period (120 minutes maximum). To
disable this function, select Off.
Advanced Functions
Special Functions
Using the Options menu
Display main menu by pressing MENU. Select Options
and press OK to confirm.
The Options options are as below:
Subtitle: this enables subtitle for digital TV channels.
Select Subtitle option, press the OK or right direction
button to
display the Subtitle menu. And press the left or right
direction button to select On/Off to turn on/off subtitles.
Then press the up or down direction button to select
Subtitle type and use the left or right direction button to
select Normal or Hearing impaired.
SPDIF type: Highlight the SPDIF type option, then press
the left or right direction button to select a proper sound
type from the list for digital programs.
- If the current program outputs sound in AC3 format, then
either PCM or AC3 can be selected.
- If the current program does not output sound in AC3
format, only PCM can be selected. Otherwise no sound
will be output.
- Select Off to turn off the audio output from the audio
device connected to the SPDIF out.
Note: The options you may choose depend on the
program you are watching.
T-Link: To search for CEC devices connected to the HDMI
sockets in your TV and enable one-touch play and one-
touch standby between CEC devices, press the left or
right direction button to select On or Off.
Use one-touch play: One-touch play enables you to
press the play button on, for example, your DVD remote
control. This starts playback on your DVD device and
automatically switches your TV to the correct source,
displaying DVD content.
Use System standby: System standby enables you to
press and hold the button on, for example, your TV
remote control. This switches your TV and all connected
HDMI devices on or to standby mode.
Location: Use the left or right direction button to select
Home or Shop mode. Home mode is the default. If Shop
mode selected, the picture will be displayed in Vivid mode,
E-sticker picture will appear on screen. In Shop mode, you
can adjust the picture mode, but when turning on the TV
next time, the Picture preset will restore to Vivid mode,
and a prompt about Shop mode will appear.
12
Advertisement
Table of Contents
