Usb Functions - TCL L24D20FES Operation Manual

Reset: This feature enables you to reset the picture and
sound settings to their predefined factory values, but
maintain the channel installation settings. Press OK to
start to reset the TV to factory settings.
Setting Source labels
You can select the accessory devices you have connected
to the external inputs /outputs.
1. Display the main menu by using the Menu button,
select Setup and press OK to enter the Setup menu.
2. Highlight Source labels, and press the OK or right
direction button to display the Source labels menu.
3. Use the up or down direction button to select a
connector your equipment is connected to, then press
the left or right direction button to select the type of
apparatus attached to this convector.
Setup your favourite channels
You can create a list of up to seven of your favourite TV
channels.
1. Select a channel you want to define as your favourite
channel.
2. Press FAV. to display the Favorite list menu.
3. Press the up or down direction button to select a
position, then press OK to select or unselect this
channel as your favourite channel.
4. Repeat this procedure to setup other favourite
Channels.

USB Functions

Your TV is fitted with a USB connector that enables you to
view pictures, listen to music or watch videos stored on a
USB storage device.
Supported file formats:
Picture: JPEG
Music: MP3
Video coding format: H.264/Xvid/MPEG4/MPEG2/MPEG1
When a USB device is detected, it enters the Media
Center menu directly.
Advanced Functions
Picture
To display pictures if available.
1. Select Media Center > Picture, then press OK to enter
the main file content browser.
2. In the main file content browser, you can press the
red/green key on the remote control to page up/down.
3. Select an inner file folder, press OK to enter a subfile
content browser. User can also press red/green key to
page up/down in the sub browser in the same way as
mentioned above.
4. Select a picture in either main or sub file content
browser, press OK to watch, and a slide show begins
from the selected picture.
5. Press the colour buttons on the remote control to
perform the available functions shown at the bottom
frame.
Music
To playback music if available.
1. Select Media Center > Music, then press OK to enter
the main file content browser.
2. Press the red/green key to page up/down in either main
or sub file content browser in the same way as in
picture display function.
3. Select a song, press OK to play, and an automatic
playback begins from the selected song.
4. Press:
- the colour buttons on the remote control to perform
the available functions shown at the bottom frame.
- REV , PLAY ,
to perform the related functions.
Video
To watch video if available.
1. Select Media Center > Video, then press OK to enter
the main file content browser.
2. Press the red/green key to page up/down in either main
or sub file content browser in the same way as in
picture display function.
3. Select a video, press OK to watch, and an automatic
playback begins from the selected video.
4. Press:
- the colour buttons on the remote control to perform
the available functions shown at the bottom frame.
- REV , PLAY ,
to perform the related functions.
13
, STOP or PAUSE
, STOP or PAUSE