Editing; Connecting To A Vcr Or Stereo System - Sony SLV-ED95MN/TH Operating Instructions Manual

Editing

Connecting to a VCR or stereo system

How to connect to record on this VCR
This VCR (Recorder)
LINE-2 IN
VMC-810HG audio/video cable (not supplied)
: Signal flow
How to connect to a stereo system
Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the
stereo system, using the RK-C510HG audio cable (not supplied).
Tips
• If the other VCR is a monaural type and connected to this VCR's LINE-2 IN jacks,
connect the audio plug to the AUDIO L (white) jack. The sound is recorded on both
right and left channels. When connecting to the AUDIO R (red) jack, the sound is
recorded only on the right channel.
• You can also use the LINE-1 IN (SAT IN/STB IN) or LINE-3 IN jacks instead. If the
other VCR is a monaural type, the sound is recorded only on the channel whose
jack is connected to the audio plug. To record on both right and left channels,
connect the audio plugs to the AUDIO R/L jacks using a VMC-910HG audio/video
cable (not supplied).
Notes
• Make sure you connect the plugs to the jacks of the same colour.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
TV
Other VCR (Player)
LINE OUT
49
Editing