Mult_Pfaybackquslngthe Pal60 Systeml - Samsung Hi8 SCW71 Owner's Instruction Book

ENGLISH]
Playing back a Tape
Multi Playback (using the PAL60 System)
4" This Camcorder can convert an NTSC tape recorded ,n the SP mode to the PAL60" format,
allowing you to view ,t on a PAL TV which has Vertical sync adjustment circuitry for 60Hz
- PAL60" is a special output signal format w,th wh,ch a PAL TV can be used to v,ew a tape recorded
by an NTSC recorder
1 Set POWER switch to PLAYER mode
2 Insert an NTSC tape you want to see
3 Press MENU ON/OFF button then the MENU list w,II appear
4 Turn the UP/DOWN dial to PAL CONV OFF"
5 Press ENTER, then _twill change to PAL CONV PAL60"
• Now you can see the picture by pressing the PLAY button
6 Press MENU ON/OFF button to end setting
Notes
" This Camcorder can not record using the PAL60" system
2 When an NTSC tape is being played back the p_cture on the PAL monitor screen may shrink in the
Vertical direction
3 If the signal recorded on the tape is rn bad condition the PAL60 prayback system may malfunction
4 A PAL recorded tape can not be played back on this camcorder