Table of Contents
Advertisement
Connection to a receiver equipped with VIDEO connectors
to VIDEO IN
dimen,
to VIDEO OUT
—— Signal flow
STR-AV460,
STR-AV560/760
to VIDEO IN
etc.
MONITOR
VIDEO OUT
=
ea]
=| a=
= om [EUS
So
=
to AUDIO IN
to LINE
AUDIO IN
L to VIDEO IN
to AUDIO OUT
For details, see the instruction manual of the receiver.
Notes
@ If the VCR Is Installed near a tuner or a radio, noise
may be heard in AM reception: In this case, keep the
VCR away from the tuner or the radio, adjust the AM
bar antenna for minimum noise, or connect an exter-
nal AM antenna to the tuner.
@ Before connecting or disconnecting the power cord
of the VCR, be sure to turn the connected amplifier
off.
POWER CONNECTION
AC OUTLET
This socket provides a convenient ac power source for
other video or audio equipment whose power consump-
tion is under 400 watts. Power will be supplied to the
connected equipment even if the recorder is turned off.
AC OUTLET
@ Do not connect here any electrical home appliances
=
whose power consumption exceeds 400 watts, such
=P
as an electric Iron or fan.
to wall outlet |
When you insert the power plug Into a wail outlet, ali
numerals In the display window will light up for about
six seconds (and the tape loading mechanism may also
run a little). All functions will not operate at this step,
although the power indicator lights up. After these six
seconds, the power Is turned off. To supply power to the
recorder, press the POWER switch.
Advertisement
Table of Contents
