Ferroli DIVATOP D HF Instructions For Use, Installation & Maintenance page 53

DIVATOP D HF
Table 1- Description - Boiler information menu [Diagnostic]
Parameter displayed
[CH 1 temp]
[CH 2 temp]
[DHW temp]
[Ext temp]
[Fume temp]
[Power]
[DHW flow]
[Water Pressure]
[Flame]
If the sensor is damaged or disconnected, the display will show dashes (--).
To return to the main screen, press the button
Boiler counters menu [Counters]
The system counters are displayed in this menu:
[Burner]
Burner operation total hours.
[Ignition ok]
Number of successful ignitions.
[CH pump time]
Pump operation hours in heating.
[DHW pump time]
pump operation hours in DHW.
Boiler faults menu [Alarm]
The card can store the last 11 faults. Alarm 1 repre-
sents the most recent fault that occurred.
The codes of the faults saved are also displayed in the
relevant menu of the Remote Timer Control.
Press the buttons
of faults. Cancel is the last item in the list and which,
once selected and confirmed with the button
allows all the faults history to be reset.
To exit the Boiler faults menu [ALARM], press the
button repeatedly until reaching the main screen
or wait for automatic exit after 15 minutes.
EN
Description
NTC Flow sensor (°C)
NTC Return sensor (°C)
NTC DHW sensor (storage tank probe) (°C)
NTC External sensor (°C)
NTC Fume sensor (°C)
Actual burner power (%)
Actual DHW draw (l/min)
System pressure status
Flame status
and Heating to scroll the list
cod. 3540000180 - Rev. 00 - 05/2023
Range
0 ÷ 125 °C
0 ÷ 125 °C
0 ÷ 125 °C
+70 ÷ -30°C
0 ÷ 125 °C
0 ÷ 100 %
-- (Value unavailable)
Ok / Err
-- ÷ 255
repeatedly or wait for automatic switching after 15 minutes.
Burner
Ignition ok
CH pump time
DHW pump time
ALARM
Alarm 1
Alarm 2
,
Alarm 3
Alarm 4
Alarm 5
Alarm 6
Alarm 7
Alarm 8
COUNTERS
0h
3
--h
--h
fig. 18
ALARM
Alarm 5
37
Alarm 6
37
Alarm 7
13
Alarm 8
--
Alarm 9
--
Alarm 10
--
Alarm 11
--
Cancel
--
fig. 19
--
--
--
--
--
--
--
53