Adjusting Sleep Timer Settings - Sharp AQUOS LC-22SV2U Operation Manual

ADJUSTMENTS (Continued)
You can set the SLEEP TIMER to automatically turn off the TV.
Directly setting the SLEEP TIMER
1 Press SLEEP to display the SLEEP
TIMER screen.
SLEEP
2
Press SLEEP to set the sleep timer
(in minutes).
30 "_ 60
1 1
120, 90
(minutes)
The SLEEP TIMER is turned off
when --- is displayed.
• The SLEEP TIMER screen automatically
disappears in 3 seconds.
--- REMAIN
60 REMAIN
AIVI<I_
Setting the SLEEP TIMER on the
MENU screen
1
Press MENU to display the MENU
screen.
2 Press A/V to move the cursor to
SLEEP TIMER.
3 Press </1_ to display the SLEEP
TIMER screen.
4
Press _1/_- to set the sleep timer
(in minutes).
The time can be set in increments
of 30 minutes and in the range
between 30 and 120 minutes.
The SLEEP TIMER is turned off
when --- is displayed.
5 Press MENU to return to the main
screen.
MENU
_[]SLEEP TIMER
[]VIDEO NOJgST
[]PBESET
[CLOSEO ONPTION_
[]V-CNIP BLOCK
[]SET UP
SELECT@ ENTER@ EXIT@
[]SLEEP TIMER
_RETURN
BLEEPTIMER [--- REMAIN]
SELECT@ ADJUST@ EXIT@
• When you set the SLEEP TIMER, the SLEEP indicator tights up red.
• After you set the SLEEP TIMER, turning off MAIN POWER on the TV set or pressing POWER on the remote
control wiil cancel the SLEEP TIMER setting and the SLEEP indicator goes out.
• 5 minutes before the SLEEP TIMER turns off the TV, 5 REMAIN is displayed on the screen for 4 seconds. The
SLEEP TIMER counts down and shows a similar 4-second display for each remaining minute until the timer turns
off the TV.
m