Sunslim Commercial Radiant Heaters - Creda Heating Solution Brochure

Sunslim
Commercial radiant heaters
"
Sunslim is a low cost,
robust and easy to install
radiant heater. Its tilt
mounting allows heat to be
localised, or directed to a
"
general area.
The Sunslim can be wall-mounted or
ceiling hung.
Key features
• Instant, directional radiant heat
• Available in 2kW and 3kW versions
• Completely silent in operation
• Lightweight and robust
Sunslim - Minimum
0.3
mounting distances
0.5
0.1
2.0
2.0
Product Selector
Model
CSL2
CSL3
38
• Corrosion resistant
• Suitable for bracket or chain mounting
• Easy to install
• Ideal for localised heating in large covered
areas such as factories and workshops
Sunslim heated area
Heating index
(metres)
10
12
14
16
18
H = mounting height (determined by on-site requirements)
Reference Rating
75 771601 2kW
75 771602 3kW
+44 (0) 1733 456789
Commercial
space heating
Technical Specification
• Element - 'black heat' type
• Zinc coated steel body/matt black end caps
• Chrome plated steel guards
• Anodised aluminium reflector
• Supply - 230/240V AC single phase
Dimensions
• Minimum mounting height 2 metres
• 300mm minimum clearance above the heater
• 500mm minimum clearance on either side
• Installation notes: High temperature cable must
3kW
H L W
4.0 5.24 5.49
3.6 4.88 4.94
3.2 4.51 4.39
3.5 4.33 4.12
2.8 4.14 3.84
L = length of the heated area
Height A
108mm
108mm
www.creda-heating.co.uk
be used. We recommend the use of a residual
current device (RCD)
2kW
H L
3.3 4.11
3.0 3.84
2.7 3.57
2.5 3.38
- -
W = width of the heated area
Width B Depth C
1,215mm 71mm
1,671mm 71mm
W
4.53
4.12
3.70
3.43
-