Maintenance Record - Master FWT40 Operation Manual

debris from the undercarriage and surrounding components.
14. When the machine start working you should be check the clutch
whether or not wear and tear. If the clutch will have 3/4 worn and torn,
you must change new clutch-ring.
15. Check that all shields and covers are in place, and all nuts, bolts, and
screw are tightened when the machine working. Make sure put the
cable while the machine working.

MAINTENANCE RECORD

Due to the nature and environment of use, Walk-behind Power
Trowels could be exposed to severe operating conditions. Some
general maintenance guidelines will extend the useful life of your
trowel.
1. The initial service for your trowel should be performed after 25 hours of
use, at which time your mechanic (or authorized repair shop) should
complete all of the recommended checks in the schedule below. The
chart is handy for keeping a record of the maintenance performed and
the parts used for servicing your trowel.
2. Regular service according to the schedule below will prolong the life of
the Walk-behind Power Trowel and prevent expensive repairs.
3. Keeping your Walk-behind Power Trowel clean and free from debris is
the single most important regular maintenance operation, over and
above the checks in the service schedule above, that can be performed.
After each use your Walk-behind Power Trowel should be cleaned to
remove any dust and debris from the undercarriage and surrounding
components. Use of a power washer will make clean up quick and easy,
especially if a non-stick coating was applied prior to use.
4. In the Service Schedule below, items that should be checked, replaced
or adjusted are indicated by " ○ " in the appropriate column. Not all
Tel:(+86)17737606271
5
Henan Master Machinery Co., Ltd
www.mastermachinerys.com