LUBRICATION
1. Engine oil lever check
Check the engine oil level with the engine stopped and in a level position.
1. Remove the filler cap/dipstick and wipe it clean.
2. Insert and remove the dipstick without screwing it into the filler neck.
Check the oil level shown on the dipstick.
3. If the oil level is low, fill to the edge of the oil filler hole with the
recommended oil.
4. Screw in the filler cap/dipstick securely.
2. Engine oil change
Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
1. Place a suitable container below the engine to catch the used oil, then
remove the filler cap/dipstick, drain plug, and washer.
2. Allow the used oil to drain completely, then reinstall the drain plug,
washer, and tighten drain plug securely.
Notice! Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take used oil in a sealed container to
your local recycling center or service station for reclamation. Do not throw it
in the trash; pour it on the ground, or down a drain.
Tel:(+86)17737606271
13
Henan Master Machinery Co., Ltd
www.mastermachinerys.com