Table of Contents
Advertisement
this machine.
3. Rotating and moving parts will cause injury if contacted. Make sure
guards are in place. Keep hands and feet away from moving parts.
4. The engine must always be stopped before attempting any repair or
adjustments. Ignition switch should be off.
5. To avoid slipping and loss of control when starting the trowel, the
operator should maintain good footing. It is recommended that the
operator wear safety shoes for added protection.
6. Be careful when working around pipes or ducts protruding from the floor
or slab edges. If the trowel blades hit such obstacles, damage to the
machine or possible operator injury may result.
7. When starting the machine, do not exceed 1/3 throttle position. A higher
setting may cause the Centrifugal clutch to engage and the handle to
rotate.
8. Be careful not to come in contact with the muffler when the engine is hot,
serious burns may result!
8. Over time, the blades will form a sharp edge. Be careful when handling
the old blades.
9. Gasoline is extremely flammable, and gasoline vapor can explode.
Refuel outdoors, in a well-ventilated area, and keep other flames and
sparks away.
10. Do not fill the fuel tank completely. After refueling, tighten the fuel tank
cap securely.
11. Before beginning your preoperational checks, be sure the engine is
level and the engine switch is in the OFF. The max. gradient of 20° must
not be exceeded when the engine working.
12. Don't allow children to operate the engine. Keep children and pets away
from the area of operation.
13. After each use your machine should be cleaned to remove any dust and
Tel:(+86)17737606271
4
Henan Master Machinery Co., Ltd
www.mastermachinerys.com
Advertisement
Table of Contents
