Timer; Min Interval Alarm; Snooze.el - Fisher PH-DTA100 Operating Instructions Manual

10 MIN INTERVAL ALARM
This feature will notify you of the time lapse
every 10 minutes after the set time arrives.
When first ten-minute passed. One beep sound
can be heard, second ten-minute pass two
beep sounds can be beared. In the same way,
when sixth ten-minute pass, six beep sounds
can be heard and then power off.
Note;
Beep sound level is not concerned with the
volume level.
• The beep sound'is mixed with function
sound (CD, TUNER).
SNOOZE/ALARM
1. Set the TIMER time first. See "TIMER"
section.
2. Press [SNOOZE/ALARM]. "ALARM"
appears.
I I n
II h _l I I
timer
IIII U I'ju
When the timer ON time arrives, the power is
turned on automatically, and the unit start play¬
ing with the preset function selected.
NOTE:
It only can be set under timer set on and power
off status.
SNOOZE
When the timer is switched on, the sound will
be turned up to the position previously set with
the VOLUME control.
Press [SNOOZE/ALARM]. "SNOOZE" blinks
on the display. The sound stop for about 9
minutes, then start again. This is repeated
every time [SNOOZE/ALARM] is pressed until
the timer goes out.
CH/TR \l/
SNOOZE
IIJ
IJ
IL
TIMER
™ 1 1
IJ
l,J
MHz
• To stop the snooze, press [<l)/ON].