Table of Contents
Advertisement
iK81 / iK42
USER GUIDE
A Snapshot is a device-wide representation of most of the settings in the device. This is represented as four Input Component
numbers, four Output Component numbers, plus a number of machine-centric settings such as routing and Input/Output
Analogue/Digital selection etc.
Navigation
Parameter navigation and adjustment on the iK42/iK81 Series is very straightforward. There is no concept of drilling down deeper
into hidden menus; every parameter is accessible by simply scrolling across a 'map' of parameter pages which can be thought of
as placed on a 2-dimensional grid. Horizontally across the width of the grid are the various channels, and vertically up and down
the grid are the parameter pages for each section of processing.
To view a parameter, repeatedly press the desired <INPUT> or <OUTPUT> channel button until the desired channel is reached.,
Then repeatedly press the up <> and down <> buttons to scroll through the processing parameters for the selected
input/output. For example, to adjust the first band of parametric EQ on input C, press 'Input' three times, 'C' will be displayed on
the left of the LCD window. Then press 'Up' 5 times. The display will scroll from Gain to Delay, High pass filter, two low shelf
filters before arriving at the first parametric which may now be edited using the select and adjust controls.
Two encoders allow you to select and adjust a parameter. Often, several parameters will be shown in various zones on the
display. To select a parameter for adjustment, turn the left-most encoder such that the parameter you wish to adjust is
highlighted. Then turn the right-most encoder to adjust the value of that parameter. Turning this encoder clockwise will increase
the value of a parameter, or anticlockwise will decrease it. The encoders are velocity-sensitive so turning an encoder rapidly will
cause the action to 'accelerate', so the value changes more rapidly.
Turn the SELECT encoder to highlight the zone you wish to adjust.
Turn the ADJUST encoder to change its value.
iK81 / iK42 User Guide V2.3
24
Advertisement
Table of Contents
