Martin Audio Ikon IK81 User Manual page 23

iK81 / iK42
Press "Enter" and you will see the following screen;

Press "Enter" again you will see this screen;-

Press "Input" again and you will see the Recal Preset Screen for input B;-

Repeat the previous process, scroll the Adjust knob to select the XE300 passive preset, press "Enter" twice to confirm.

When the preset is loaded press "Input" again to load the same preset into input C and repeat, finally press "Input"
once more to enter the preset into input D. Press "Utility to return to the home screen;-
This shows that DSP A, B C and D are loaded with the XE300 Passive Preset, Input 1 is routed to Output 1, Input 2 to Output 2
and so on. The amplifier is ready to use.
iK81 / iK42 User Guide V2.3
USER GUIDE
22